{"title":"Screens \u0026 Displays","description":"\u003cp\u003eBrowse our Screens \u0026amp; Displays collection. Hot Sale.\u003c\/p\u003e","products":[{"product_id":"adafruit-rgb-negative-16-x-2-lcdkeypad-kit-for-raspberry-pi-discontinued","title":"Adafruit RGB Negative 16 x 2 LCD+Keypad Kit for Raspberry Pi [Discontinued]","description":"\u003cp\u003eThis new Adafruit Pi Plate makes it easy to use an RGB 16x2 Character LCD. We really like the RGB Character LCDs we stock in the shop. (For RGB we have RGB negative and RGB positive.) Unfortunately, these LCDs do require quite a few digital pins, 6 to control the LCD and then another 3 to control the RGB backlight for a total of 9 pins. That's nearly all the GPIO available on a Pi!\u003cbr\u003e\u003cbr\u003eWith this in mind, we wanted to make it easier for people to get these LCDs into their projects so we devised a Pi plate that lets you control \u003cstrong\u003ea 16x2 Character LCD, up to 3 backlight pins AND 5 keypad pins using only the two I2C pins on the R-Pi!\u003c\/strong\u003e The best part is you don't really lose those two pins either, since you can stick i2c-based sensors, RTCs, etc and have them share the I2C bus. This is a super slick way to add a display without all the wiring hassle.\u003cbr\u003e\u003cbr\u003eThis pi plate is perfect for when you want to build a stand-alone project with its own user interface. The 4 directional buttons plus the select button allow basic control without having to attach a bulky computer.\u003cbr\u003e\u003cbr\u003eThe plate is designed for both Revision 1 and Revision 2 Raspberry Pi's. It uses the I2C (SDA\/SCL) pins. We have a special extra-tall 26-pin header so the plate sits above the USB and Ethernet jacks. \u003cstrong\u003eFor Pi Model B+ and Pi 2\u003c\/strong\u003e, the resistors sit right above the new set of USB ports. To keep them from shorting against the metal, a piece of electrical tape must be placed onto the USB ports.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis product comes as a kit!\u003c\/strong\u003e Included is a high-quality PCB and all the components (buttons, header etc). \u003cstrong\u003eA 16x2 Character RGB negative LCD is included!\u003c\/strong\u003e Assembly is easy, even if you've never soldered before and the kit can be completed in 30 minutes.  Check the product tutorial page for assembly instructions before purchasing.\u003cbr\u003e\u003cbr\u003eWe also have some handy Python code to help you easily talk to the LCD and buttons. You can also easily query the 5 keypad buttons to get input through the library, so you get extra buttons without using any more pins. The buttons are automatically de-bounced inside the library.\u003cbr\u003e\u003cbr\u003eAt this time, the code and plate can control the RGB backlight of our character LCDs by turning each LED on or off. This means you can display the following colours: Red, Yellow, Green, Teal, Blue, Violet, White and all colours turned off. There is no support for PWM control of the backlight at this time, so if you need to have more granular control of the RGB backlight to display a larger range of colours, this plate can't do that (the I2C expander does not have PWM output).\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: We've updated this Pi plate so there are buttons on the right side which makes it a little more mechanically stable.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 2.2\" x 3.35\"\u003c\/li\u003e\n\u003cli\u003eComes with a 16x2 RGB NEGATIVE LCD\u003c\/li\u003e\n\u003cli\u003ePlug and play with any Raspberry Pi\u003c\/li\u003e\n\u003cli\u003eUses only the I2C (SDA\/SCL) pins\u003c\/li\u003e\n\u003cli\u003eThis board\/chip uses I2C 7-bit address 0x20.\u003c\/li\u003e\n\u003cli\u003ePCB files, schematic, and Fritzing available in the product tutorial\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Guide\u003c\/li\u003e\n\u003cli\u003eDownloads and Schematic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53697470759188,"sku":"fem1787257134185","price":18.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/9486\/7220\/files\/adafruit-rgb-negative-16-x-2-lcdkeypad-kit-for-raspberry-pi-discontinued_1.jpg?v=1787257138"},{"product_id":"adafruit-bluewhite-16-x-2-lcdkeypad-kit-for-raspberry-pi-discontinued","title":"Adafruit Blue\u0026White 16 x 2 LCD+Keypad Kit for Raspberry Pi [Discontinued]","description":"\u003cp\u003eThis new Adafruit Pi Plate makes it easy to use a blue and white 16x2 Character LCD. We really like the 16x2 Character LCDs we stock in the shop. Unfortunately, these LCDs do require quite a few digital pins, 6 to control the LCD and then another 1 to control the backlight for a total of 7 pins. That's nearly all the GPIO available on a Pi!\u003cbr\u003e\u003cbr\u003eWith this in mind, we wanted to make it easier for people to get these LCDs into their projects so we devised a Pi plate that lets you control \u003cstrong\u003ea 16x2 Character LCD, up to 3 backlight pins AND 5 keypad pins using only the two I2C pins on the R-Pi!\u003c\/strong\u003e The best part is you don't really lose those two pins either, since you can stick i2c-based sensors, RTCs, etc and have them share the I2C bus. This is a super slick way to add a display without all the wiring hassle.\u003cbr\u003e\u003cbr\u003eThis pi plate is perfect for when you want to build a stand-alone project with its own user interface. The 4 directional buttons plus the select button allow basic control without having to attach a bulky computer.\u003cbr\u003e\u003cbr\u003eThe plate is designed for both Revision 1 and Revision 2 Raspberry Pi's. It uses the I2C (SDA\/SCL) pins. We have a special extra-tall 26-pin header so the plate sits above the USB and Ethernet jacks. \u003cstrong\u003eFor Pi Model B+ and Pi 2\u003c\/strong\u003e, the resistors sit right above the new set of USB ports. To keep them from shorting against the metal, a piece of electrical tape must be placed onto the USB ports.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis product comes as a kit!\u003c\/strong\u003e Included is a high-quality PCB and all the components (buttons, header etc). \u003cstrong\u003eA 16x2 Character blue \u0026amp; white monochrome LCD is included!\u003c\/strong\u003e Assembly is easy, even if you've never soldered before and the kit can be completed in 30 minutes.  Check the product tutorial page for assembly instructions before purchasing You may get a 2-row or 1-row connector LCD, either will work fine.\u003cbr\u003e\u003cbr\u003eWe also have some handy Python code to help you easily talk to the LCD and buttons You can also easily query the 5 keypad buttons to get input through the library, so you get extra buttons without using any more pins. The buttons are automatically de-bounced inside the library.\u003cbr\u003e\u003cbr\u003eAt this time, the code and plate can control the white backlight on or off. There is no support for PWM control of the backlight at this time, so if you need to have more granular control of the backlight, this plate can't do that (the I2C expander does not have PWM output).\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: \u003cstrong\u003eWe've updated this Pi plate so the buttons are on the right side, which makes it a little more mechanically stable\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 2.2\" x 3.35\"\u003c\/li\u003e\n\u003cli\u003eComes with a 16x2 Blue \u0026amp; White LCD\u003c\/li\u003e\n\u003cli\u003ePlug and play with any Raspberry Pi\u003c\/li\u003e\n\u003cli\u003eUses only the I2C (SDA\/SCL) pins\u003c\/li\u003e\n\u003cli\u003eThis board\/chip uses I2C 7-bit address 0x20\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Page\u003c\/li\u003e\n\u003cli\u003eDownloads and Schematic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53697470955796,"sku":"sda1787257135116","price":14.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/9486\/7220\/files\/adafruit-bluewhite-16-x-2-lcdkeypad-kit-for-raspberry-pi-discontinued_1.jpg?v=1787257139"},{"product_id":"gfx-hat-128x64-lcd-display-with-rgb-backlight-and-touch-buttons-discontinued","title":"GFX HAT - 128x64 LCD Display with RGB Backlight and Touch Buttons [Discontinued]","description":"\u003cp\u003eA 128x64 pixel, 2.15\" LCD display with snazzy six-zone RGB backlight and six capacitive touch buttons. GFX HAT makes an ideal display and interface for your headless Pi projects.\u003c\/p\u003e\n\u003cp\u003eGFX HAT riffs off our beloved\u003cspan\u003e \u003c\/span\u003eDisplay-O-Tron HAT, but gives you the flexibility of individual pixels, letting you display more complex graphics and real typefaces, while retaining the handy capacitive touch buttons for input\/navigation.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e128x64 pixel, 2.15\" LCD display\u003c\/li\u003e\n\u003cli\u003eIntegrated diffuser\/reflector assembly\u003c\/li\u003e\n\u003cli\u003eSix-zone RGB LED backlight\u003c\/li\u003e\n\u003cli\u003eSN3218 LED driver chip (I2C address 0x54)\u003c\/li\u003e\n\u003cli\u003eSix capacitive touch buttons with white LEDs\u003c\/li\u003e\n\u003cli\u003eMicrochip CAP1166 capacitive touch\/LED driver chip ((I2C address 0x2c)\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi 3B+, 3, 2, B+, A+, Zero, and Zero W\u003c\/li\u003e\n\u003cli\u003ePython library\u003c\/li\u003e\n\u003cli\u003eComes fully assembled (breakout pins require soldering)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eOur\u003cspan\u003e \u003c\/span\u003ePython library\u003cspan\u003e \u003c\/span\u003ehandles displaying on the LCD, controlling the backlight, and linking functions to the touch buttons. We've also included a\u003cspan\u003e \u003c\/span\u003ecouple of examples\u003cspan\u003e \u003c\/span\u003eto get you started.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur software does not support Raspbian Wheezy.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":53697525416212,"sku":"myr1787257813887","price":11.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/9486\/7220\/files\/gfx-hat---128x64-lcd-display-with-rgb-backlight-and-touch-buttons-discontinued_1.jpg?v=1787257818"},{"product_id":"37-epaper-display-for-raspberry-pi-pico-480x280","title":"3.7\" ePaper Display for Raspberry Pi Pico (480x280)","description":"\u003cp\u003eLooking for an e-Paper display for your Raspberry Pi Pico? Look no further! This 3.7\" 480x280 black\/white e-Paper display from Waveshare is perfect for adding a low-power display to your Pico.\u003c\/p\u003e\n\u003cp\u003ee-Paper displays are designed to replicate the appearance of ink on paper. Unlike regular displays, which lose their image when power is removed, e-Paper displays are able to hold text and images indefinitely, even without power! ePaper screens are therefore ultra low power, designed to have a wide viewing angle and additionally have limited reflection under sunlight. The applications are limitless!\u003c\/p\u003e\n\u003cp\u003eYour Raspberry Pi Pico slots into the female connectors on the back of the display, then you simply power the entire setup via the Pico's micro-USB connector - no need for additional power supplies. The display includes corner standoff mounting points and comes complete with 4 metal standoffs for fitting to your own panel or enclosure.\u003c\/p\u003e\n\u003cp\u003eThis display communicates via the SPI interface and supports partial refresh.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNote: \u003c\/span\u003e\u003cstrong\u003eRaspberry Pi Pico not included\u003c\/strong\u003e\u003cspan\u003e. You'll need a Pico with male headers soldered to it. You can \u003c\/span\u003egrab a Pico here\u003cspan\u003e and \u003c\/span\u003ePico male headers here\u003cspan\u003e, or buy a Pico with pre-soldered headers.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eCompatible with Raspberry Pi Pico\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3.7\" e-Paper display\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e480x280 pixels\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e170° Viewing Angle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo backlight - keeps displaying last content for a long time even when powered down\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUltra-low power consumption, power is only required for refreshing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSPI interface - requires minimal IO pins\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOnboard voltage translator, compatible with 3.3V \/ 5V MCUs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOnline development resources and manual\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMetal standoffs included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eOperating Voltage: 3.3V\/5V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eResolution: 480x280 Pixels\u003c\/li\u003e\n\u003cli\u003eInterface: 3-wire SPI, 4-wire SPI\u003c\/li\u003e\n\u003cli\u003ePartial refresh time: 0.3s\u003c\/li\u003e\n\u003cli\u003eFull refresh time: 3s\u003c\/li\u003e\n\u003cli\u003eOutline Dimensions: 95.3mm x 56.9mm\u003c\/li\u003e\n\u003cli\u003eRefresh Power: 26.4mW (typ.)\u003c\/li\u003e\n\u003cli\u003eDot Pitch: 0.169mm x 0.169mm\u003c\/li\u003e\n\u003cli\u003eDisplay Colour: Black\/white\u003c\/li\u003e\n\u003cli\u003eGrey Scale: 4\u003c\/li\u003e\n\u003cli\u003eViewing Angle: \u0026gt;170\u003cspan\u003e°\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDisplay size: 81.12mm x 47.32mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStandby current: \u0026lt;0.01uA (almost none)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eResources\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eProduct Wiki\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003ePackage Contents\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e1x 3.7\" Pico e-Paper \u003c\/span\u003e\u003cspan\u003eDisplay\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e4x Metal standoffs\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi Pico not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003ePinout\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt='Pico 3.7\" e-Paper display pinout' src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/pinout_e223295e-f785-4b34-9162-7d2518a59992.jpg?v=1626861708\u0026amp;width=700\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eSPI Interface\u003c\/span\u003e\u003c\/h2\u003e\n\u003ctable class=\"tabSty-1 tabSty-noheader subBlock\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVCC\u003c\/td\u003e\n\u003ctd\u003e3.3V\/5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003eGround\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDIN\u003c\/td\u003e\n\u003ctd\u003eSPI MOSI pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCLK\u003c\/td\u003e\n\u003ctd\u003eSPI SCK pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCS\u003c\/td\u003e\n\u003ctd\u003eSPI chip selection, low active\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDC\u003c\/td\u003e\n\u003ctd\u003eData \/ Command selection (high for data, low for command)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRST\u003c\/td\u003e\n\u003ctd\u003eExternal reset, low active\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBUSY\u003c\/td\u003e\n\u003ctd\u003eBusy status output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":53697559593236,"sku":"rkv1787258302416","price":19.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/9486\/7220\/files\/37-epaper-display-for-raspberry-pi-pico-480x280_1.jpg?v=1787258306"},{"product_id":"2-ips-lcd-display-for-raspberry-pi-pico-320x240","title":"2\" IPS LCD Display for Raspberry Pi Pico (320x240)","description":"\u003cp\u003eEasily add a clear and colourful display to your Raspberry Pi Pico project with this 2\" IPS LCD 65K RGB display from Waveshare!\u003c\/p\u003e\n\u003cp\u003eWith the included Raspberry Pi Pico C\/C++ examples, getting started with this screen is quick and easy. There's also no soldering required with this LCD display - just slot your Pico into the female headers on the rear and you're good to go!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4 programmable buttons\u003c\/strong\u003e can be found on each corner of this IPS display, giving you lots of interface control options for your project. They're already connected to the Pico's GPIO pins too (pins 2, 3, 15 and 17).\u003c\/p\u003e\n\u003cp\u003eThis display uses an embedded ST7789VW driver, which uses the SPI bus to communicate with your Pico using just the 4 pins (leaving the majority of your Pico pins free for other things!).\u003c\/p\u003e\n\u003cp\u003eWe also have our own set of tutorials teaching you how to use these displays with MicroPython:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eColour Control\u003c\/li\u003e\n\u003cli\u003eCoding Graphics\u003c\/li\u003e\n\u003cli\u003eAdvanced Text\/Fonts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRaspberry Pi Pico not included\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e. You'll need a Pico with male headers soldered to it. You can \u003c\/span\u003egrab a Pico here\u003cspan data-mce-fragment=\"1\"\u003e and \u003c\/span\u003ePico male headers here\u003cspan data-mce-fragment=\"1\"\u003e, or buy a Pico with pre-soldered headers.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with the Raspberry Pi Pico\u003c\/li\u003e\n\u003cli\u003e320x240 resolution\u003c\/li\u003e\n\u003cli\u003eIPS display\u003c\/li\u003e\n\u003cli\u003e65K RGB Colours\u003c\/li\u003e\n\u003cli\u003eSPI Interface\u003c\/li\u003e\n\u003cli\u003e4x User programmable buttons at the end of the display\u003c\/li\u003e\n\u003cli\u003eOnline development resources and manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 2.6-5.5V\u003c\/li\u003e\n\u003cli\u003eResolution: 320x240 pixels\u003c\/li\u003e\n\u003cli\u003eCommunication Interface: 4-wire SPI\u003c\/li\u003e\n\u003cli\u003eDisplay Size: 40.80mm x 30.60mm\u003c\/li\u003e\n\u003cli\u003eDisplay panel: IPS\u003c\/li\u003e\n\u003cli\u003ePixel size: 0.1275mm x 0.1275mm\u003c\/li\u003e\n\u003cli\u003eDriver: ST7789VW\u003c\/li\u003e\n\u003cli\u003eDimensions: 52mm x 35mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003cli\u003eThe Pi Hut Tutorials:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eColour Control\u003c\/li\u003e\n\u003cli\u003eCoding Graphics\u003c\/li\u003e\n\u003cli\u003eAdvanced Text\/Fonts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x 2\" Pico LCD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi Pico not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003ePinout\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/2-inch-display-for-raspberry-pi-pico_6.jpg?v=1626908631\u0026amp;width=700\" alt='2\" Pico LCD Pinout'\u003e\u003c\/p\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":53697559789844,"sku":"bjb1787258305150","price":7.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/9486\/7220\/files\/2-ips-lcd-display-for-raspberry-pi-pico-320x240_1.jpg?v=1787258309"},{"product_id":"28-touchscreen-ips-lcd-display-for-raspberry-pi-pico-320x240","title":"2.8\" Touchscreen IPS LCD Display for Raspberry Pi Pico (320x240)","description":"\u003cp\u003eThis 2.8\" IPS resistive touchscreen display has been designed specifically for the Raspberry Pi Pico and offers a 320x240 resolution with 262K colours and dedicated microSD storage!\u003c\/p\u003e\n\u003cp\u003eThe display has dedicated female headers for the Raspberry Pi Pico on the rear, removing any need for connecting wires or ribbon cables. Just slot your Pico in (male headers required) and start coding the display. The MicroSD card slot also allows you to store images for your project too.\u003c\/p\u003e\n\u003cp\u003eThe backlight is programmable to assist with the right brightness setting for your environment as well as reducing power consumption. There's also a handy Pico reset button on the rear of the display.\u003c\/p\u003e\n\u003cp\u003eUse the C\/C++ examples in the product Wiki to get your Pico display project up and running quickly. There's also a community tutorial from Mark McGookin using this board with CircuitPython.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNote: \u003c\/span\u003e\u003cstrong\u003eRaspberry Pi Pico not included\u003c\/strong\u003e\u003cspan\u003e. You'll need a Pico with male headers soldered to it. You can \u003c\/span\u003egrab a Pico here\u003cspan\u003e and \u003c\/span\u003ePico male headers here\u003cspan\u003e, or buy a Pico with pre-soldered headers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a \u003cspan style=\"text-decoration: underline;\"\u003eresistive\u003c\/span\u003e display\u003c\/strong\u003e, not \u003cspan style=\"text-decoration: underline;\"\u003ecapacitive!\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi Pico\u003c\/li\u003e\n\u003cli\u003e320×240 resolution\u003c\/li\u003e\n\u003cli\u003eIPS screen\u003c\/li\u003e\n\u003cli\u003e262K colours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistive\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003etouch with dedicated controller, smoother touch effect than AD-controlled solutions\u003c\/li\u003e\n\u003cli\u003eMicroSD card slot for storing images\u003c\/li\u003e\n\u003cli\u003eProgrammable backlight control for power saving\u003c\/li\u003e\n\u003cli\u003eReset button\u003c\/li\u003e\n\u003cli\u003e\nOnline development resources and manual\u003cspan\u003e \u003c\/span\u003e(Raspberry Pi Pico C\/C++ examples)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 5V\u003c\/li\u003e\n\u003cli\u003eCommunication Interface: SPI\u003c\/li\u003e\n\u003cli\u003eDisplay panel: IPS\u003c\/li\u003e\n\u003cli\u003eDriver: ST7789\u003c\/li\u003e\n\u003cli\u003eTouch Controller: XPT2046\u003c\/li\u003e\n\u003cli\u003eResolution: 320 x 240 pixels\u003c\/li\u003e\n\u003cli\u003eDisplay Size: 57.60mm x 43.20mm\u003c\/li\u003e\n\u003cli\u003ePixel Size: 0.18mm x 0.18mm\u003c\/li\u003e\n\u003cli\u003eDimensions: 70.20mm x 50.20mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x 2.8\" Pico Resistive Touch Display\u003c\/li\u003e\n\u003cli\u003e1x Standoff pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki with C\/C++ Examples\u003c\/li\u003e\n\u003cli\u003eCommunity CircuitPython tutorial\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's Onboard?\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt='2.8\" Pico touchscreen display features' src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/raspberry-pi-pico-2-8-inch-touchscreen_5.jpg?v=1626906777\u0026amp;width=700\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1)\u003c\/strong\u003e Raspberry Pi Pico header\u003cbr\u003e\u003cstrong\u003e2)\u003c\/strong\u003e MicroSD card slot\u003cbr\u003e\u003cstrong\u003e3)\u003c\/strong\u003e XPT2046\u003cbr\u003e- Resistive touch controller\u003cbr\u003e\u003cstrong\u003e4)\u003c\/strong\u003e RT9193-33\u003cbr\u003e- 3.3V linear voltage regulator\u003cbr\u003e\u003cstrong\u003e5)\u003c\/strong\u003e Pico reset button\u003c\/p\u003e\n\u003ch2\u003ePinout\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt='2.8\" Pico Display Pinout' src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/raspberry-pi-pico-2-8-inch-touchscreen_3.jpg?v=1626906809\u0026amp;width=700\"\u003e\u003c\/p\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":53697559855380,"sku":"ohj1787258305766","price":8.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/9486\/7220\/files\/28-touchscreen-ips-lcd-display-for-raspberry-pi-pico-320x240_1.jpg?v=1787258310"},{"product_id":"35-ips-dpi-capacitive-touchscreen-display-for-raspberry-pi","title":"3.5\" IPS DPI Capacitive Touchscreen Display For Raspberry Pi","description":"\u003cp\u003eNeed a small display for your Raspberry Pi project, but don't want to sacrifice on quality and resolution? This display might be for you!\u003c\/p\u003e\n\u003cp\u003eThis is a 3.5\" IPS capacitive touchscreen display which has been designed specifically for the Raspberry Pi, using a female header to accept the Raspberry Pi 4,3,2 3A+ or Zero.\u003c\/p\u003e\n\u003cp\u003eThe display has a 640x480 resolution which is impressive for a screen this size. Combined with IPS technology offering 170\u003cspan\u003e°\u003c\/span\u003e viewing angles and the DPI interface offering 262K colours + a \u003cspan\u003erefresh rate up to 60Hz\u003c\/span\u003e - it stands out amongst other Raspberry Pi displays at this scale.\u003c\/p\u003e\n\u003cp\u003eThe capacitive 5-point touch via I2C (OS dependant) alongside the toughened glass panel (up to 6H) make this display a great choice for many different kinds of Raspberry Pi projects.\u003c\/p\u003e\n\u003cp\u003eYou don't need to use any messy cables either - the entire display \u0026amp; touch is derived via the GPIO pins and standoffs are included to mount your Pi securely to the display (note: this display consumes all GPIO pins via the female header). Just set up the screen following the Wiki instructions and you're ready to go!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Raspberry Pi not included\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically for the Raspberry Pi\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi 4, 3B+, 3, 3A+, Zero (W\/WH)\u003c\/li\u003e\n\u003cli\u003e40-pin GPIO header socket for connection\u003c\/li\u003e\n\u003cli\u003e3.5\" IPS Display\u003c\/li\u003e\n\u003cli\u003e262K colours\u003c\/li\u003e\n\u003cli\u003e640x480 hardware resolution\u003c\/li\u003e\n\u003cli\u003eUsing DPI666 interface, refresh rate up to 60Hz\u003c\/li\u003e\n\u003cli\u003eDrive capacitive touch through I2C interface, 5-points touch\u003c\/li\u003e\n\u003cli\u003eToughened glass panel, hardness up to 6H\u003c\/li\u003e\n\u003cli\u003eSupports Raspberry Pi OS and Kali systems (other OS not officially supported but may still work if based on Raspberry Pi OS)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x 3.5\" IPS DPI LCD\u003c\/li\u003e\n\u003cli\u003e1x Screws Pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":53697559920916,"sku":"qlp1787258307310","price":21.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/9486\/7220\/files\/35-ips-dpi-capacitive-touchscreen-display-for-raspberry-pi_1.jpg?v=1787258312"},{"product_id":"hyperpixel-40-square-hi-res-display-for-raspberry-pi","title":"HyperPixel 4.0 Square - Hi-Res Display for Raspberry Pi","description":"\u003cp\u003eA uniquely square, high-resolution, high-speed, 4.0\" display with optional touchscreen for the Raspberry Pi – it's hip to be square! \u003cstrong\u003eAvailable with or without touch\u003c\/strong\u003e (select before adding to your cart)\u003c\/p\u003e\n\u003cp\u003eHyperPixel 4.0 Square has all the great features of the standard HyperPixel 4.0 - a crisp, brilliant IPS display, optional touchscreen, and high-speed DPI interface - it's just more square!\u003c\/p\u003e\n\u003cp\u003eThis square version of HyperPixel 4.0 is great for custom interfaces and control panels, and works really well for Pico-8 games. Everything is pre-soldered and ready to go, just pop it onto your Pi, run our installer, and away you go!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-speed DPI interface\u003c\/li\u003e\n\u003cli\u003e4.0\" IPS (wide viewing angle, 160°) display (72x72mm)\u003c\/li\u003e\n\u003cli\u003e720x720 pixels (~254 PPI)\u003c\/li\u003e\n\u003cli\u003e18-bit colour (262,144 colours)\u003c\/li\u003e\n\u003cli\u003e60 FPS frame rate\u003c\/li\u003e\n\u003cli\u003eOptional capacitive touchscreen\u003c\/li\u003e\n\u003cli\u003e40-pin female header included to boost height for Pi B+, 2, 3, 3B+ and 4\u003c\/li\u003e\n\u003cli\u003eStandoffs included to securely attach to your Pi\u003c\/li\u003e\n\u003cli\u003eCompatible with all 40-pin header Raspberry Pi models\u003c\/li\u003e\n\u003cli\u003eOne-line installer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHyperPixel 4.0 Square uses a high-speed DPI interface, allowing it to shift 5x more pixel data than the usual SPI interface that these small Pi displays normally use. It has a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e60 FPS frame rate\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand a resolution of approximately 254 pixels per inch (\u003cstrong\u003e720x720px\u003c\/strong\u003e) on its 4.0\" display. The display can show\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e18-bits of colour\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(262,144 colours).\u003c\/p\u003e\n\u003cp\u003eThe touchscreen variant is capacitive touch, that's more sensitive and responsive to touch than a resistive touch display, and it's\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecapable of multi-touch\u003c\/strong\u003e!\u003c\/p\u003e\n\u003ch2\u003ePlease note (Important!)\u003c\/h2\u003e\n\u003cp\u003eWhen installing HyperPixel 4.0 Square onto your Pi\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003emake sure not to press down on the screen surface\u003c\/strong\u003e\u003c\/span\u003e! Hold the board by its edges and wiggle it to mate with the extended header (or GPIO header).  Also take care\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003enot to pull on the edges of the glass display\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ewhen removing your HyperPixel.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eIt'll work with any 40-pin version of the Pi, including Pi Zero and Pi Zero W. If you're using it with a larger Pi then use the extra 40-pin header that's included to boost it up to the required height. If you're using a Pi Zero or Pi Zero W then just pop it straight onto the GPIO.\u003c\/p\u003e\n\u003cp\u003eThe included standoff kit allows you to mount your HyperPixel 4.0 Square safely and securely to your Pi. Just screw them into the posts on the underside of the HyperPixel 4.0 Square PCB and then secure with screws through the mounting holes on your Pi.\u003c\/p\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eWe've put together a one-line installer to configure your Pi properly for HyperPixel 4.0 Square and to enable the touchscreen. Note that you'll need another display, keyboard, and mouse to install the software, or you could do it remotely over SSH if you follow our guide on how to set your Pi up headlessly.\u003c\/p\u003e\n\u003cp\u003eOpen a terminal, and type \u003ccode\u003ecurl https:\/\/get.pimoroni.com\/hyperpixel4 | bash\u003c\/code\u003e\u003cspan\u003e \u003c\/span\u003eto run the one-line installer and set your HyperPixel 4.0 up.\u003c\/p\u003e\n\u003cp\u003eFind the GitHub repository here: https:\/\/github.com\/pimoroni\/hyperpixel4\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe HyperPixel 4.0 Square Touch in the main photo here is on its side, and that the slightly narrower and slightly wider bezels are usually at the bottom and top respectively, although there's very little difference in size (5.5mm for the left and right sides, 4.5 for the top, and 6.5mm for the bottom). The Non-touch is also on its side, so the wider bezel is usually at the bottom, although because the display is square you can use it any way round!\u003c\/li\u003e\n\u003cli\u003eDimensions: Touch: 84x84x9.5mm, Non-touch: 75x80x8.9mm (WxHxD, depth includes header and display).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Touch","offer_id":53697559986452,"sku":"idc1787258308073","price":46.86,"currency_code":"USD","in_stock":true},{"title":"Non-Touch","offer_id":53697560019220,"sku":"ifp1787258308074","price":41.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/9486\/7220\/files\/hyperpixel-40-square---hi-res-display-for-raspberry-pi_1.jpg?v=1787258313"}],"url":"https:\/\/regalwearstore.shop\/collections\/screens-displays.oembed","provider":"My Store","version":"1.0","type":"link"}